PRODUCTS Repair mortars

Displaying: Repair mortars


ATLAS ADHER S - contact coat for concrete repairs

ATLAS ADHER S - contact coat for concrete repairs - ATLAS


The main characteristics • high bonding to substrates • contact coat for application underneath ATLAS screeds • high content of corrosion inhibitors • long-term reinforcement protection • high bonding to concrete and steel


ATLAS FILER S - repair mortar for concrete, thickness 10-50 mm

ATLAS FILER S - repair mortar for concrete, thickness 10-50 mm - ATLAS


The main characteristics • designed for repairs of single- and multilayer concrete or ferroconcrete substrates • very high compressive strength, min. 60 MPa • next layer of ATLAS FILER S applicable after 4 hours • finishing coat application after 24 hours • for manual and machine application


ATLAS ENDER S - finishing coat for concrete repairs, thickness 3-10 mm

ATLAS ENDER S - finishing coat for concrete repairs, thickness 3-10 mm - ATLAS


The main characteristics • fine-aggregate • designed for leveling concrete and ferroconcrete surfaces • for filling cavities in prefabricated elements • does not require application of contact coat • for manual and machine application • finishing coat applicable after 24 h


ATLAS ZW 330 - quick-setting leveling mortar

ATLAS ZW 330 - quick-setting leveling mortar - ATLAS


The main characteristics • high adhesion and compressive strength • reinforced with polypropylene fibres • plastic consistency • under tiles, finishing coats, plasters, subfloors • tiling just after a few hours


ATLAS MONTER T-5 - fast-setting assembly mortar

ATLAS MONTER T-5 - fast-setting assembly mortar - ATLAS


The main characteristics • for anchoring of construction elements • beginning of setting just after 5 minutes • compressive strength after 1 hour not less than 10.0 MPa • blocks local water leakages • for non-structural repairs of concrete and ferroconcrete elements (mortar with addition of sand)


ATLAS MONTER T-15 - fast setting assembly mortar

ATLAS MONTER T-15 - fast setting assembly mortar - ATLAS


The main characteristics • for anchoring construction elements • does not cause corrosion of steel elements • strong adhesion to the substrate • grout under machines and equipment • rapid strength build-up


ATLAS TEN-10 - fast setting cement-based mortar

ATLAS TEN-10 - fast setting cement-based mortar - ATLAS


The main characteristics • for repairs of concrete and ferroconcrete substrates • for making high load bearing jointless floors • rapid strength build-up, limited contraction • floor access already after 3 hours • strong adhesion to ceilings

Larnaca Shop

  • Filoktiti 5, Aradippou, P.C 7101, Larnaca, Cyprus
  • Phone: +357 24 102585
  • Fax: +357 24 102586

Limassol Shop

  • 4 Omonias & Galinou, 3052, Limassol, Cyprus
  • Phone: +357 25 378103
  • Fax: +357 25 313176

Newsletter


Type your email address in order to be updated about our latest news, offers and new products.